Note： When the ambient temperature is less than 25℃(77℉), it is better to take measures for heat preservation. It’s good for temperature uniformity when the device is enclosed with clothes or other warms, and it also helps energy-saving and reduces heat dissipation.
Cautions:
1. Unpack the box and check the incubator, check whether all of the accessories inside the packing box are well-equipped. See the packing list for details.
2. Make sure you are clear of the User manual before using the product.
Auto thermometer, Automatic egg turner(turn itself, can't to be seen by human eyes), Temperature Control, Alarm & Auto Rotation Functions
Q: Is this a forced-air or still-air incubator?
A: It’s a forced-air incubator. It has a little fan in it that circulates the air
Q: How do I know if it's turning my eggs?
A: You can test by marking the egg with a pencil and periodically checking to see if the marked side has moved. It's a slow process.
Q: Is it possible to turn off the automatic turner?
A: You can't turn off the automatic turner but you can position the tray so that the eggs don't get turned/rotated. But keep in mind eggs have to be turned until they are very close to hatching.
Q: Does it show the humidity reading? And how to keep the humidity?
A: There is no humidity setting on this incubator. You could add your own hygrometer inside if needed, and manually adjust the humidity and add or remove water as needed. It stays pretty consistent. You could give it a passing look each day to check the temp and put in water if needed to keep the humidity around 55%. That will vary by location and weather.
Q: How do I adjust the offset temperature?
A: The user booklet has information on how to access the temp. Hold the temp button till flashing capital letters then "+ " till you hit CA then you can step +/- to calibrate.
Q: The incubator is not holding a consistent temp. How to do that?
A: 1. The factory temperature setting is about 38 degrees ( Celsius ) (38 degrees is suggested for the chicken eggs, if any other kinds of eggs, you need to adjust by the suggested temp.)
2. For the "inaccurate" reading of the temp, After some time, the sensors of other thermometers might start to give a false reading by a degree or two which can affect hatch rates if not caught. This isn't exclusively a Magicfly issue, it also happened to other incubators and other thermometers.
We suggest you use more than one thermometer/humidity sensor to work with if needed.
3. Recommended setting for different eggs Note： The temperature of the house-used thermometer may vary from our egg incubator when the ambient temperature is less than 25℃(77℉), it is better to take measures for heat preservation. It’s good for temperature uniformity when the device is enclosed with clothes or other warms, and it also helps energy-saving and reduces heat dissipation.
Magicfly Auto Egg Incubator Manual: Download Here
